headbg

China Wholesale Continuous Centrifuge Machine Manufacturers - Vacuum Deaerator with High Quality – Taiyi

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our solutions are broadly acknowledged and dependable by users and may meet consistently developing economic and social requires for Explosion Proof Emergency Light, Solar Light, Round Ceiling Light, Our products are regularly supplied to many Groups and lots of Factories. Meanwhile, our products are sold to the USA, Italy, Singapore, Malaysia, Russia, Poland, and the Middle East.
China Wholesale Continuous Centrifuge Machine Manufacturers - Vacuum Deaerator with High Quality – Taiyi Detail:

Parameter

Model TY/ZCQ240 TY/ZCQ270 TY/ZCQ300 TY/ZCQ360
Tank Diameter 700mm 800mm 900mm 1000mm
Processing Capacity 240m³/h 270m³/h 300m³/h 360m³/h
Vacuum -0.03~-0.045MPa
Transmission Ratio 1.68 1.72
Degassing Efficiency ≥95%
Main Motor Power 15kw 22kw 30kw 37kw
Vacuum Pump Power 2.2kw 3kw 4kw 7.5kw
Impeller  Speed 860r/min 870r/min 876r/min 880r/min
Ex Marking ExdIIBt4
Size 1750*860*1500mm 2000*1000*1670mm 2250*1330*1650mm 2400*1500*1850mm

Features

The suction of the vacuum pump is used to make the mud enter the vacuum tank, and the gas is pumped out of the vacuum tank by using it. The vacuum pump plays two different roles here.

The water ring vacuum pump is always in an isothermal state during the working process, suitable for the suction of flammable and explosive gas, and has reliable safety performance.

The mud is shot to the four walls at a high speed through the window of the rotor, the bubbles in the mud are broken completely, and the degassing effect is good.

The main motor is biased and the center of gravity of the whole machine is lowered.

The belt drive is adopted to avoid the complexity of the deceleration mechanism.

The application of the steam-water separator does not cause water and air to be discharged at the same time, so that the exhaust pipe is always unblocked. In addition, it can also circulate water to the vacuum pump, saving water.

The suction pipe is inserted into the mud tank and can be used as a high-power agitator when the mud is not immersed in air.

Summary

The vacuum deaerator uses the suction effect of the vacuum pump to create a negative pressure zone in the vacuum tank. Under the action of atmospheric pressure, the mud enters the hollow shaft of the rotor through the suction pipe, and then is thrown to the tank in a spray pattern from the window around the hollow shaft. The wall, due to the impact of the separation wheel, separates the drilling fluid into thin layers, the bubbles immersed in the mud are broken, and the gas escapes. The gas is separated by the suction of the vacuum pump and the gas-water separator, and the gas is separated from the exhaust pipe of the separator Drain to a safe area, and the mud is discharged out of the tank by the impeller. Since the main motor is started first, and the impeller connected to the motor is rotating at a high speed, the mud can only enter the tank from the suction pipe, and will not be sucked through the discharge pipe.


Product detail pictures:

China Wholesale Continuous Centrifuge Machine Manufacturers - Vacuum Deaerator with High Quality – Taiyi detail pictures

China Wholesale Continuous Centrifuge Machine Manufacturers - Vacuum Deaerator with High Quality – Taiyi detail pictures


Related Product Guide:

Our primary target will be to provide our clients a serious and responsible small business relationship, supplying personalized attention to all of them for China Wholesale Continuous Centrifuge Machine Manufacturers - Vacuum Deaerator with High Quality – Taiyi , The product will supply to all over the world, such as: Ukraine, South Korea, Lebanon, We'll initiate the second phase of our development strategy. Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. If you are interested in any of our products and solutions or would like to discuss a custom order, make sure you feel free to contact us. We've been looking forward to forming successful business relationships with new clients around the world in the near future.
  • Customer service staff and sales man are very patience and they all good at English, product's arrival is also very timely, a good supplier.
    5 Stars By Sharon from French - 2017.10.25 15:53
    Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
    5 Stars By May from America - 2017.09.30 16:36

    Send your message to us:

    Write your message here and send it to us

    Send your message to us:

    Write your message here and send it to us