headbg

China Wholesale Remi Centrifuge Machine Factory - Vacuum Deaerator with High Quality – Taiyi

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" plus the theory of "quality the basic, have faith in the main and management the advanced" for Round Led Panel Light Dimmable, Hanging Light Round, Commercial Cooker, We hope we can have a friendly relationship with businessman from all over the world.
China Wholesale Remi Centrifuge Machine Factory - Vacuum Deaerator with High Quality – Taiyi Detail:

Parameter

Model TY/ZCQ240 TY/ZCQ270 TY/ZCQ300 TY/ZCQ360
Tank Diameter 700mm 800mm 900mm 1000mm
Processing Capacity 240m³/h 270m³/h 300m³/h 360m³/h
Vacuum -0.03~-0.045MPa
Transmission Ratio 1.68 1.72
Degassing Efficiency ≥95%
Main Motor Power 15kw 22kw 30kw 37kw
Vacuum Pump Power 2.2kw 3kw 4kw 7.5kw
Impeller  Speed 860r/min 870r/min 876r/min 880r/min
Ex Marking ExdIIBt4
Size 1750*860*1500mm 2000*1000*1670mm 2250*1330*1650mm 2400*1500*1850mm

Features

The suction of the vacuum pump is used to make the mud enter the vacuum tank, and the gas is pumped out of the vacuum tank by using it. The vacuum pump plays two different roles here.

The water ring vacuum pump is always in an isothermal state during the working process, suitable for the suction of flammable and explosive gas, and has reliable safety performance.

The mud is shot to the four walls at a high speed through the window of the rotor, the bubbles in the mud are broken completely, and the degassing effect is good.

The main motor is biased and the center of gravity of the whole machine is lowered.

The belt drive is adopted to avoid the complexity of the deceleration mechanism.

The application of the steam-water separator does not cause water and air to be discharged at the same time, so that the exhaust pipe is always unblocked. In addition, it can also circulate water to the vacuum pump, saving water.

The suction pipe is inserted into the mud tank and can be used as a high-power agitator when the mud is not immersed in air.

Summary

The vacuum deaerator uses the suction effect of the vacuum pump to create a negative pressure zone in the vacuum tank. Under the action of atmospheric pressure, the mud enters the hollow shaft of the rotor through the suction pipe, and then is thrown to the tank in a spray pattern from the window around the hollow shaft. The wall, due to the impact of the separation wheel, separates the drilling fluid into thin layers, the bubbles immersed in the mud are broken, and the gas escapes. The gas is separated by the suction of the vacuum pump and the gas-water separator, and the gas is separated from the exhaust pipe of the separator Drain to a safe area, and the mud is discharged out of the tank by the impeller. Since the main motor is started first, and the impeller connected to the motor is rotating at a high speed, the mud can only enter the tank from the suction pipe, and will not be sucked through the discharge pipe.


Product detail pictures:

China Wholesale Remi Centrifuge Machine Factory - Vacuum Deaerator with High Quality – Taiyi detail pictures

China Wholesale Remi Centrifuge Machine Factory - Vacuum Deaerator with High Quality – Taiyi detail pictures


Related Product Guide:

"Sincerity, Innovation, Rigorousness, and Efficiency" could be the persistent conception of our enterprise to the long-term to produce together with clients for mutual reciprocity and mutual profit for China Wholesale Remi Centrifuge Machine Factory - Vacuum Deaerator with High Quality – Taiyi , The product will supply to all over the world, such as: Madagascar, Tunisia, Buenos Aires, Aiming to grow to be by far the most experienced supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal merchandise. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. In depth data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're about to make it possible for you to get complete acknowledge about our things and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
  • The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
    5 Stars By Alexandra from Istanbul - 2017.09.09 10:18
    The company can think what our think, the urgency of urgency to act in the interests of our position, can be said this is a responsible company, we had a happy cooperation!
    5 Stars By Matthew Tobias from Durban - 2017.11.29 11:09

    Send your message to us:

    Write your message here and send it to us

    Send your message to us:

    Write your message here and send it to us